Contact us today...+971 4 347 4466
BS PROPS
BS Props fully confirm to the requirements of BS 4074:1982 and have been tested in accordance with BS 5507 pat 3:1982. BS Props can be used on all types of buildings construction or for any type of use where an adjustable load bearing member is required. The High tensile steel pin is located through a slot in the outer section and a hole on the inner section for coarse adjustment. The cast collar located below the pin gives fine adjustment for leveling or striking. The rolled thread ensures no loss of material or strength at this point.
| ItemCode | Standard | MinHeight | MaxHeight | Weight |
|---|---|---|---|---|
| BS0 | BS4074 | 1.07m | 1.82m | 11.0kg |
| BS1 | BS4074 | 1.75m | 3.12m | 16.7kg |
| BS2 | BS4074 | 1.98m | 3.35m | 18.4kg |
| BS3 | BS4074 | 2.59m | 3.95m | 20.2kg |
| BS4 | BS4074 | 3.20m | 4.87m | 24.2kg |
LIGHT & MEDIUM DUTY PROPS
| Item Code | Standard | Sizes | Min Height | Max Height | Weight |
|---|---|---|---|---|---|
| BSL500 | BS4074 | 5.0m | 3.00m | 5.00m | 15.8kg |
| BSL400 | BS4074 | 4.0m | 2.50m | 4.00m | 13.6kg |
| BSL390 | BS4074 | 3.9m | 2.40m | 3.90m | 13.2kg |
| BSL350 | BS4074 | 3.5m | 2.00m | 3.50m | 12.5kg |
| BSL300 | BS4074 | 3.0m | 1.75m | 3.00m | 11.0kg |
| BSL250 | BS4074 | 2.5m | 1.50m | 2.50m | 09.6kg |
A Weight are given for props having 2mm thick tube. Props are available in 2, 3.2 & 4mm thk. tubes other sizes are available on request. Caution is advised as follows:
- Props must always be loaded concentrically and be plumb.
- SWLs allow not more than 1.5 Deg. Out-of-plumb loaded concentrically.
- Any extension attachment bolted to the Prop must be considered in height when using the table.
- It should be ensured that the Prop always rests on the safest axis and loaded concentrically.
